Pearl Candles use

Pour the candle beads into a suitable candle holder , such as a vase, decorative bowl, or other high-quality item that provides sufficient height for the beads. Note: Make sure the chosen holder is heat-resistant.

Determine the correct amount of candle beads
Measure the required amount of candle beads based on the size of the chosen holder. Fill the holder to approximately 80% of its total capacity to allow for sufficient space for an even finish.
Optional: Add fragrance If desired, you can add a few drops of fragrance oil to the candle beads. Use a pipette to distribute the oil evenly over the beads. Adjust the amount of fragrance oil to personal preference, depending on the desired fragrance intensity.

 

Place the wick
Position the wick in the center of the holder. Make sure the wick is upright and centered. Let the wick protrude at least 0.5 cm above the candle beads for optimal use. Make sure the wick does not touch the bottom of the holder so that the wax capsule can be easily removed after use. The wicks have a melting diameter of 3 to 4 cm. We recommend using a candle holder that is quite wide (wider than a tea light) so that you can easily remove the formed wax capsule after use.

Done burning?
extinguish the wick with a snuffer, let the wax solidify and remove the solid by simply pulling the wick upwards. Shake the beads and your candle is ready for reuse! The wick can be used multiple times. Cut off the burnt part and replace the wick.

The fuses have a burning time of approximately 8-10 hours each.

Remove washing capsule
Preferably throw these away in the compost and place a new wick to restart the candle use.

Enjoy your creation
Light the wick and experience the warm atmosphere and possible scent of the candle you made.

Always extinguish the wick with a snuffer

With this simple step-by-step plan you can effortlessly create your own personalized candles with candle beads. Enjoy a unique fragrance experience and an atmospheric ambiance in your home.